7 Steps in Picking the Appropriate Roof Color For Your Home

It might be challenging to pick a color scheme for your roof because there are many colors which can be chosen regardless of whether you are installing metal, slate or asphalt. And for each of the shingle color which is available, there are several shades and color combination. But there is a need for you to choose wisely because you will live with the roof for about 20 to 30 years to come.
Below are some things to consider when choosing the color of your roof:

  • Dark vs. light roof colors
    There are many people who have asked about the heat retention ability of light and dark colors, but a study which was conducted revealed that plywood sheathing under black shingles was 10 degrees warmer than its white counterpart on a sunny day. But the study shows that there is minimal difference between other shades of roofs like browns and grays. However, what I will advise is that you should choose the roof color you like because you will have to use it for a long period of time.


  • Chose shingle that matches your brick color
    Whenever you are choosing a roofing color, you need to remember that shutter and paint colors can be changed anytime, but bricks cannot be changed. This is why it is essential for you to compare shingle colors with that of bricks and then compare with the siding or paint colors.


  • Compare roofing materials with the color of exterior paint
    If you want to change the exterior color of your home, you need to compare the new paint color with the roofing or shingle samples. To do this, go to the local hardware store and buy a 2-by-6-foot board, then paint it with the new color. Place the board next to the roof materials which you are considering and next to the permanent colors on your home. With this, you will be able to see whether they match or not.


  • Complementary color choices add dimension to your roof
    Some of the color mistakes most homeowners make are that they choose a color which almost matches the siding or brick and this makes the combination to be monotonous, boring, almost lifeless color scheme. This is why it is crucial to complement colors rather than matching them exactly.


  • Tone down your exterior with a simple shingle color
    The rule of the thumb states that if the rest of your home is painted with multiple colors, it is good to choose a single shingle color because excessive patterns of color would overwhelm the eyes. However, if your home has a monotone feel, a vivid color can be added to enhance the appearance.


  • View roofing shingles in all types of light
    When you are comparing the color of roofing samples with that of your home exterior, ensure you look at the shingle samples under the sun and in the shade. Place the sample in a sunny place where the brick colors meet the siding and paint colors, then check again after the area has been covered with shade. Ensure all the exterior house colors work well in all lighting.


  • You should consider resale value of your home when picking a roof
    You may like a bright roof color but not everyone would love such color, if you aim to sell your home very soon, it is better to choose a neutral roofing material so that the resale value would be protected. In some cases, the buyer might like the interior of the home but decided to back-off because of the roofing.


Safety tips for christmas lights

The Dos and Don’ts of Hanging Outdoor Holiday Lights

As you start to plan your Christmas, your mind may turn to the outdoor decorations and that all-important street view. But while you’re sorting out your decorating ideas for the winter season, keep these safety tips in mind. Installing outdoor lighting, in particular, can be dangerous so consider hiring a professional.

The do’s of holiday lighting

DO thoroughly check your electrical system. Inspect the plugs and outlets you’ll be using. If there’s heating and sparking in the socket, call an electrician. If your lights have loose or bare wires, don’t use them.

DO check your lights. Before installing your Christmas lights, plug them in to make sure all of your bulbs are working.

DO use the proper outlets for outdoor decorations (in fact, any outdoor electrical stuff, period) using a ground-fault circuit interrupter, which will automatically cut off the power in the event of a spike or short.

DO make sure you have someone with you when you’re using a ladder. Even for an easy job, have someone on hand to steady the ladder and keep an eye out for your safety.

DO consider hiring professional help. If you don’t want to invest in the cost of a holiday decorating service, try calling a professional local roofer who has plenty of experience working outside on ladders and often hang lights in the off-season.

DO consider using magnetic hooks. Lights mounted using magnetic clips may have a few more limitations, such as only installing on metal, but they’re easier to install and safer to use.

DO invest in LED bulbs.

Although they cost more up front, you’ll save money in the long run, as they last 12 times longer than traditional bulbs.

The don’ts of holiday lighting

Don’t install your lights on trees that come in contact with power lines.

DON’T nail or staple through electrical wires or cords. (It’s surprising how many people do this.)

DON’T overload the power. If your lights constantly trip the circuit breaker or GFCI, you probably have too many lights.

DON’T use extension cords unwisely. Do not run them under rugs, around furniture legs or across doorways. Be sure you put safety covers on any unused outlet or extension cord plug – you don’t want children fooling around with them. Tape cords across walkways while in use.

DON’T hire a contractor without checking their insurance and workers’ comp. Hanging holiday lights, like any other job involving a ladder, has a higher risk of injury than most other household jobs, and you don’t want to be held responsible for their medical bills.

DON’T mix up outdoor and indoor lights. Outdoor lights burn hotter than indoor lights, so don’t hang lights inside if they’re meant for the outdoors.

DON’T leave your lights on all through the night. Add a timer, so you don’t have to worry about wasting energy.

Fall check list roofing

4 Home Maintenance Tasks For Fall

It’s time to start thinking about your autumn to-do list. Some of the easiest fall chores can save you big dollars on your energy bills — not to mention prevent major potential problems.

These are the maintenance tasks we recommend before temperatures drop:

1. Seal Drafts And Add Insulation

• Caulk, seal and weather strip: Pay special attention to drafts around doors and windows, especially if you haven’t installed new energy efficient windows.
TIP: A simple way to identify air leaks that can cost you money: Take a lit stick of incense or a candle and go around the perimeter of doors and windows. Drafts will pull the smoke in their direction, making it easier to see where the cold air is seeping in. Replace or add worn weather stripping or caulk in those spots.

• Measure your insulation: Check your attic to see if you have exposed joists if so, you should add more insulation. The amount of insulation you need depends on where you live — the cooler the climate, the more insulation you’ll need.

• Audit energy waste: A good way to improve your home’s energy efficiency, is to consider scheduling a professional energy audit for a thorough look at insufficient insulation and air leaks, which wastes energy.


2. Protect Your Plumbing

• Insulate your water lines: Look at your water lines and plumbing pipes — especially those on the exterior walls — and make sure they’re insulated to avoid frozen pipes and leaks during this winter. Cleaning all lines can help remove clogs that cause backups, which can freeze, then cause the weakening of pipes and bursting.
TIP: Wrap your pipes with insulation designed for plumbing. In many situations, good insulation will be all you need to protect the pipes.

• Drain your water heater: This can enhance your water heater’s efficiency by as much as 50%, by draining sediment buildup from inside the water heater holding tank.

• Remove and drain any outside hoses: Before the first freeze, you should detach outdoor hoses, drain any standing water and store them inside.
Drain your exterior faucets and close the interior shut-off valves to the hose bibs or spigots to prevent frozen pipes during the winter.


3. Check Your Gutters, Roof, And Chimney

• Clean your gutters: Dead leaves are the hallmark of autumn and can quickly pile up and lead to blocked gutters. Dead leaves and other muck can lead to backups that cause water damage or even contribute to an ice dam during the winter.
You can use a professional for gutter cleaning, or get up on a ladder and clean the gutters yourself. Even if gutters are not clogged at the start of fall, check again after the leaves have fallen.

• Inspect your roof: While you’re looking up, perform a visual roof inspection. Make sure your shingles are in sound condition, that none are missing and that they’re properly attached. Look for any sags or dips, which may symbolize a problem with the wood underneath your roof shingles. If your roof is more than 20 years old, consider scheduling an inspection with a roofing contractor.

• Schedule a chimney sweep: Creosote buildup can lead to a chimney fire, so get your fireplace and chimney cleaned before you put it back into use this winter. You should have your chimney inspected at least once a year, and more often if you use it regularly.


4. Service Your Furnace

• Schedule fall HVAC maintenance: A large majority of emergency service calls answered by heating specialists result from poor maintenance.

• Replace furnace filters: The new season is also the perfect time to check and change dirty furnace filters. Clean filters help your HVAC system run more efficiently, so it distributes heat better and cuts down on your energy costs. Plus, it’s an easy and inexpensive and task.


It is important to be careful when inspecting your roof or gutters.  You should ideally hire a professional to inspect the home and give you a report. If you have any questions and would like to talk to a professional roofer, please get in contact. We’ll be more than happy to help.

Roofing material

Best Roofing Materials for Hot Climates

When you consider how a building keeps cool, the most common thing that comes to mind is air conditioning. But the first real line of defense against the heat is a building’s roof. And a hot day a good roof should be releasing, not storing and absorbing, the sun’s rays.

As Texas is known for its hot and humid climate, with only the winter season offering a much-needed release from the blistering heat, you should be critical of what sort of materials you choose for your roof. CP Roofing & Exteriors discusses the best roofing materials for hotter climates.

Asphalt Roofing

Asphalt roofing is the most cost-effective and popular roofing system on the market. The asphalt holds the heat in place, preventing it from seeping into the home through the attic or ceiling area.

By far the biggest advantage of composition shingles roofing is its relatively low upfront cost. This is the most affordable roofing option in the short term, which is why so many Texas homeowners favor it. In most cases, a properly installed asphalt shingles roof will equip your home with a decent level of protection with an average lifespan of 11 to 17 years, all for a modest upfront cost.

Though it’s a long-lived material, it does need a little additional maintenance since it doesn’t handle moisture very well. While the water resistance of asphalt is good, it is the sudden changes between wet and dry that can disturb the protective covering from the shingles.

Metal Roofing

Metal roofing is fast becoming the most popular alternative to asphalt thanks to its longer lifespan and sheer strength. It also has higher heat resistance than asphalt and is virtually immune to moisture and water damage. We advise using this roofing system if you want your home to have higher heat resistance.

Energy Efficiency. Attics in hot climates get extremely hot. That heat then transfers down into the home, dramatically increasing air conditioning costs and also making living spaces uncomfortable.

Metal roofing offers three ways in which it keeps homes cooler and reduces air-conditioning costs often by 20% or more.

  • Light colored metal roofs or metal roofs with special pigments in dark colors reflect radiant heat.
  • Metal roofs lose any gained heat very quickly to the sky when the sun sets or goes behind a cloud or even when a slight breeze blows. Other roofing materials capture and hold the sun’s heat.
  • Many metal roofs – especially the shingle, shake and tile look ones – have an integral airspace between the metal and the roof deck. This air space acts as a thermal break, stopping conductive heat transfer.

Learn more about the types of roofing CP Roofing & Exteriors offers.

If you need help deciding what material to use for your roofing, or you need professional roof repair, call us at (214) 609-3969 for more information on our services or start your free estimate now. We install asphalt and metal roofing throughout North Texas.